Evolution Osiris Skid Plate For Jetta V & VI, Golf VI, Rabbit, GTI and R32

This Kit Includes:

1 Osiris Aluminum Skid Plate.

1 Osiris Hardware Kit, containing:

• 2 Blue, Steel Osiris Side Brackets.
• 1 Osiris Rivet Nut Installation Tool.
• 1 Osiris Bolt Kit.

Fits:
2005.5-2010 Jetta
2009-2014 SportWagon & Golf Wagon
2006-2014 Rabbit & GTI
2010-2014 Golf VI

WHY YOU SHOULD BUY EVOLUTIONS "OSIRIS" ALUMINUM SKID PLATE!

Volkswagen's oil pans are made of a paper-thin cast aluminum that is easily cracked by many objects such as road debris, manhole covers and speed bumps. While your car may be at stock height, there is only approximately 4 inches of ground clearance with your oil pan. If you are lowered from stock height, there is very little room for error when negotiating an object in your path. Here is some information on this Evolution Aluminum Skid Plate for those of you that haven't seen it before.

•   The plate is 5052 grade aluminum and is 4.8mm (.191 inches) thick.
•   Smooth Finish.
•    Protects your cars oil pan, a/c pump, radiator, transmission and sub frame.
•    Bolts to pre-existing holes in your frame.
•    Never rusts.
•    Weighs 16.6 pounds (20.5 including hardware).
•    Maximum amount of ground clearance possible provided.
•    Tested in the Northern Canada winter with -40C weather.
•    Less then one hour to install.
•    The most user friendly rivet-nut installation tool comes with every kit.
•    Can be installed with or without your stock plastic skid plate.
•    An oil drain hole that is 98% cut out for TDI only. Oil Drain Cover must be purchased separately. See Below. Finish the cut and you will have an oil drain hole in the skid plate.
•    A detailed easy to follow, step by step guide is only located on Evolutions website and not included in the kit. The Install Guide for your kit is: Osiris Install Guide
•    Draft/Design by: EVOLUTION IMPORT INC.
•    CNC Machine Manufactured for precision guaranteeing a perfect fit.

Oil Changes: We make it easy for you. If you don't want to remove the skid plate at every oil change, we have provided every skid plate with an oil drain hole that is 98% cut out for TDI diesel engine only. Finish the cut and you will have an oil drain hole in the skid plate. If you want to seal up the oil hole we have a bolt on cover that can be ordered here: Osiris Oil Cover A jig saw or hack saw blade is your easiest method of finishing the cut. For the TDI diesel cars that use the plastic skid plate in conjunction with the aluminum skid plate, you will need to cut a hole in the plastic skid plate as well, in the same location. However removal of the skid plate for oil changes is very quick and easy taking 1-2 minutes. Only the bottom six bolts need to be removed and the skid plate drops right down and off of your VW.