MK3 B4 Engine Block Rebuild Kit (Mk3)(B4) 

Kits consists of:

• 1 Crankshaft bearing set
• 1 Front crankshaft bolt
• 1 Thrust bearing set
• 1 Connecting rod bearing set
• 8 Connecting rod bolts
• 1 Oil pump
• 2 Oil pump bolts 
• 2 Oil pump bolt washers
• 1 Oil pan gasket
• 10 Main bearing bolts
• 1 Front main seal
• 1 Rear main seal

Note: When replacing the engine block, rods, crankshaft, and especially pistons it is imperative to measure piston protrusion at TDC above the block deck in order to select the correct head gasket thickness. Projection MUST fall between .91mm and 1.20mm & have the appropriate head gasket thickness to achieve the correct compression ratio.