Bosio DLC 706 - SINGLE NOZZLE [EC-5]

SINGLE NOZZLE

New for 2015!!

Available with our Calibration Service and HotSwap Program!

Direct Replacement for the: BoschDSLA 150P 706 -BOSCH 0433175150
Direct Replacement for the: BoschDSLA 150P 672 -BOSCH 0433175139

This is the Smoke fix replacement nozzle that replaced the Recalled nozzles under the 1999 Smoke Fix Recall (Obsolete):

Bosch DSLA 150P 442 -BOSCH 0433175072
Bosch DSLA 150P 357 -BOSCH 0433175058

Flow Data: ORIGINAL FACTORY FLOW NOZZLES

Supports Power Outputs from: 90hp (with supporting modifications)
ULSD Rated Nozzle -

!!! New Design for 2015 !!!

Flow Settings:
Stage I: 90hp (Standard Flow Setting for all cars Original OEM settings)
Stage II: 95hp
Stage III: 100hp

About Stock Flow Nozzles:

-Due to the very slow flow rates of OEM type nozzles, flow settings higher than Stage III will not be set due to excessive EGT?s measured at the turbo.

-Fuel economy due to emissions was not a primary concern from the factory, slowing injection and reducing NOx was, thus fuel economy with this type of nozzle will never be optimized. In cases where maximum fuel economy is needed we strongly urge selecting a DLC 520 which will net between a 4-6 mpg gain due to the much improved injection window that nozzle can provide.

- Works perfectly with Stock ECU engine computers
- Includes OEM seals
- DLC (Diamond Like Carbon) Coated needle
- 3-4 fold increase in nozzle life
- Faster cycling low friction needle
- 10%+ greater precision in flow control
- Tighter tolerances, less internal leakage
- Tighter internal tolerances than OEM by up to 50%
- Atomically perfect DLC coated sliding surfaces
- Optimized hole geometry for improved atomization and dispersion
- Hardened wear surfaces
- Slight power bump vs the OEM parts with less pump displacement volume
- Improved economy by up to and in some cases greater than 2%

Injector Calibration Service and Options

: Simply select the HotSwap option when adding your injector selection and injector service to your shopping cart, A fully refundable deposit of $600 is added to the price of your injector selection. What you getwhen you choose our HotSwap option, we will send you a freshly rebuilt set of injectors for your year and model car. Injectors arrive fully mounted, balanced and overhauled. We also include our own Injector Puller and Injection Quantity Adjuster tool to simplify and ease the removal of your old set.

Your injectors arrive in a pre-addressed USPS shipping box which you can return your used injectors to us in via USPS Priority Mail.

When we receive your used rebuildable³ injectors along with the enclosed tools, we will refund the full deposit amount. At your option, you may choose to keep the Puller and/or IQ adjustment tool and we will simply deduct that from your core deposit amount and refund the remaining balance to you.

Please note: We require that you return of your used cores (and tools) within 21 business days to receive a full refund.

² Variable Flow settings are applied during installation and overhaul of injectors, HP output are estimates and may require significant modifications to the engine, fuel system and ECU to reach those levels. Values are based on previous performance levels reached in similar engines with appropriate supporting engine modifications.
³ Injectors must be returned complete with old nozzles and with an undamaged #3 injector whose wire is undamaged. Mild cosmetic damage is permissible, as long as damage does not interfere with the injector operation. We reserve the right to refuse a core(s) and in those cases we will give you the opportunity to provide a replacement injector(s) to allow us to refund your full deposit amount. We can for a modest shipping fee return your old nozzles, cleaned and packaged.

IMPORTANT: Please confirm the type of connector on your car BEFORE ordering, 2002.5 model year cars are quite often called 2003's when in fact they have the older 1996-2002.5 connector type. Actual 2003 injector connectors are typically quite rare, please physically check the style on your vehicle before placing your order (See Below):

1996-2002.5 - #3 injector Harness Connector

2003 - #3 Injector Harness

Product Fits

Volkswagen

• 1997 - 1998 Mk3 Jetta TDI with AHU Engine Code
• 1996 - 1997 B4 Passat TDI with AHU or 1Z Engine Code
• 1999 - 2003 Mk4 Golf TDI with ALH Engine
• 1999 - 2003 Mk4 Jetta TDI with ALH Engine Code
• 1998 - 2003 Mk4 New Beetle TDI with ALH Engine Code