Braided Steel Turbo Oil Supply Line for TDI (PD140 / PD140+) [A-8]

PD140 and PD140+ Oil Feed Line

This line goes over the barbed fitting that goes into the turbo. FWIW the banjo fitting on the turbo is left-handed thread but with this line does not need to be removed.

TECH NOTE

It only takes about 15ftlbs to make 'em seal. The biggest issue I see when installing this parts is that you need to route the braided line like the stock hard line and be sure to secure it with the factory clamps and bracket. If not it will rub on coolant lines and the wiring harness.

30" inch Braided line.

Fits 2005.5-2006 Jetta TDI with BRM Engine Code WITH PD 140/PD140Plus Turbo